Marki Microwave RF & Wireless

Results: 589
Select Image Part #
 Mfr.
Description Datasheet Availability Pricing (EUR) Filter the results in the table by unit price based on your quantity.
Qty. RoHS
Marki Microwave RF Development Tools The EVB-MFLP-00002P is a connectorized evaluation board for the MFLP-00002PSM passive MMIC surface mount 9.40GHz lowpass filter.
Datasheet
More Info Available
Min.: 1
Mult.: 1


Marki Microwave RF Development Tools The EVB-MFLP-00011P is a connectorized evaluation board for the MFLP-00011PSM passive MMIC surface mount 7.1GHz lowpass filter.
Datasheet
More Info Available
Min.: 1
Mult.: 1


Marki Microwave RF Development Tools The EVB-MFLP-00028 is a connectorized evaluation board for the MFLP-00028CSP1 passive MMIC surface mount 10.7 GHz lowpass filter.
Datasheet
More Info Available
Min.: 1
Mult.: 1


Marki Microwave RF Development Tools This is the evaluation board for the MM1A-0626SPSM integrated drive GaAs MMIC mixer.
Datasheet
More Info Available
Min.: 1
Mult.: 1

Marki Microwave RF Development Tools The EVB-MMPX-00001P is a connectorized evaluation board for the MMPX-00001PSM is a MMIC surface mount quadplexer capable of multiplexing 2-4 GHz / 6-8 GHz / 10-12 GHz / 14-16 GHz signals.
Datasheet
More Info Available
Min.: 1
Mult.: 1

Marki Microwave RF Development Tools The EVB-MPD-0422F is a connectorized evaluation board for the MPD-0422FCSP2 MMIC 4-22GHz 2-Way power divider/power splitter.
Datasheet
More Info Available
Min.: 1
Mult.: 1


Marki Microwave RF Development Tools The EVB-MPD4-0218 is a connectorized evaluation board for the MPD4-0218CSP3 MMIC 2-18 GHz 4-Way power divider/power splitter.
Datasheet
More Info Available
Min.: 1
Mult.: 1

Marki Microwave RF Development Tools The EVB-MPDW-0670 is a connectorized evaluation board for the MPDW-0670CSP2 MMIC 6-70GHz 2-Way power divider/power splitter.
Datasheet
More Info Available
Min.: 1
Mult.: 1

Marki Microwave RF Amplifier The ADM-8350PSM is a high-linearity, low noise amplifier capable of providing +22 dBm output power up to 6 GHz. The ADM-8350PSM can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
Datasheet
10In Stock
Min.: 1
Mult.: 1

Marki Microwave RF Amplifier A small, low power, and economical T3 driver or T3A pre-amplifier. It is a GaAs PHEMT distributed amplifier in a 3mm QFN surface mount package.
Datasheet
Non-Stocked Lead-Time 10 Weeks
Min.: 25
Mult.: 25

Marki Microwave RF Amplifier A wideband distributed low noise amplifier capable of providing 19 dB gain and +29 dBm OIP3 from DC to 18 GHz and a low 1.7 dB typical noise figure from 4 to 14 GHz.ADM-8344 is available A 4mm QFN and can be supplied from a single positive bias.
Datasheet
Non-Stocked Lead-Time 10 Weeks
Min.: 25
Mult.: 25

Marki Microwave RF Amplifier The ADM-8475PSM is a high-linearity, low noise amplifier capable of providing 13 dB gain, +26 dBm OIP3 and 2 dB noise figure across a broad 0.5-18 GHz bandwidth.
Datasheet
Non-Stocked Lead-Time 10 Weeks
Min.: 25
Mult.: 25

Marki Microwave RF Amplifier The ADM-8536PSM is one of the world's smallest 2-20 GHz high linearity, low noise amplifier solution, featuring 10.5 dB gain, +25 dBm OIP3 and 2.5 dB noise figure, making it suitable for use in RF front-ends.
Datasheet
Non-Stocked Lead-Time 10 Weeks
Min.: 25
Mult.: 25

Marki Microwave RF Amplifier A high-linearity low noise amplifier capable of providing 15.5 dB gain, 2 dB noise figure and +26 dBm OIP3 up to 10 GHz. The amplifier is suitable for use in RF front-ends requiring low noise, high gain and excellent signal fidelity.
Datasheet
Non-Stocked Lead-Time 10 Weeks
Min.: 1
Mult.: 1

Marki Microwave RF Amplifier A high-linearity, low noise amplifier capable of providing 11.5 dB gain and +25 dBm OIP3 across a broad 0.2-20 GHz bandwidth. It's low power consumption, high dynamic range and size make it an ideal choice for RF front end, low SWaP applications.
Datasheet
Non-Stocked Lead-Time 10 Weeks
Min.: 25
Mult.: 25

Marki Microwave RF Amplifier A high-linearity low noise amplifier capable of providing 18 dB gain, 1.5 dB noise figure and +27 dBm OIP3 from 750 MHz to 8 GHz. It can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
Datasheet
Non-Stocked Lead-Time 10 Weeks
Min.: 1
Mult.: 1

Marki Microwave RF Amplifier A wideband distributed low noise amplifier capable of providing 16 dB gain and +25 dBm OIP3 from 2 to 20 GHz and a low 1.8 dB typical noise figure from 8 to 16 GHz.
Datasheet
Non-Stocked Lead-Time 10 Weeks
Min.: 25
Mult.: 25

Marki Microwave RF Amplifier A wideband distributed low noise amplifier capable of providing 16 dB gain and +24 dBm OIP3 from 10MHz to 26 GHz and a low 2.5 dB typical noise figure from 6 to 20 GHz.
Datasheet
Non-Stocked Lead-Time 10 Weeks
Min.: 25
Mult.: 25

Marki Microwave RF Amplifier A wideband distributed amplifier capable of providing 14.5 dB gain and +31 dBm OIP3 from 100MHz to 22 GHz. The ADM-9181PSM is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
Datasheet
Non-Stocked Lead-Time 10 Weeks
Min.: 1
Mult.: 1

Marki Microwave RF Adapters - In Series The ADPFKFK is a 2.92mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
Datasheet
Non-Stocked Lead-Time 12 Weeks
Min.: 1
Mult.: 1

Marki Microwave RF Adapters - Between Series The ADPFVFK is a 2.4mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 or 6 mm fixed wrench recommended.
Datasheet
Non-Stocked Lead-Time 12 Weeks
Min.: 1
Mult.: 1
Marki Microwave RF Adapters - In Series The ADPFVFV is a 2.4mm Female to 2.4mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
Datasheet
Non-Stocked Lead-Time 12 Weeks
Min.: 1
Mult.: 1
Marki Microwave RF Adapters - Between Series The ADPFVMK is a 2.4mm Female to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
Datasheet
Non-Stocked Lead-Time 12 Weeks
Min.: 1
Mult.: 1
Marki Microwave RF Adapters - In Series The ADPMKFK is a 2.92mm Male to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
Datasheet
Non-Stocked Lead-Time 12 Weeks
Min.: 1
Mult.: 1

Marki Microwave RF Adapters - In Series The ADPMKMK is a 2.92mm Male to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
Datasheet
Non-Stocked Lead-Time 12 Weeks
Min.: 1
Mult.: 1